+44 (0) 1805 804202

Silverline Newsletter

Receive news, offers and updates in your inbox...

Iron And Manganese Reduction Unit With PP Back Wash PSIM/MIN/TV/PP

Iron And Manganese Reduction Unit With PP Back Wash PSIM/MIN/TV/PP

In Stock

£695.00

Not available to buy on line

Share this product...

Product Detail

Type: Iron and manganese reduction unit

For use with potable water to reduce levels of iron and manganese.

Our Iron and Manganese units include ABS lined cylinder, Automatic back wash valve. 2.5m drain hose.

This is a filter for essentially low contamination levels.

Regulation 31 approval by the Drinking Water Inspectorate.

 

 

Potassium Permanganate Declaration Form Iron and manganese reduction unit with potassium permanganate tank and automatic backwash head PSIM/5C

Specifications

Pressure: 30-100 psi
Temp: Cold water use only. Must not freeze.
Port size: 1" bsp male
Electrical rating: 240V 50Hz

Height:

Diameter: 10"

Drain connection: 1/2 inch

For use with potable water to reduce levels of iron and manganese.

Our Iron and Manganese units include ABS lined cylinder, Automatic back wash valve. 2.5m drain hose.

Please note:

  • Where water pH level is below 6.5, for best results a Silverline pH correction unit should be fitted before this filter.
  • Where water appears clean at source, but discolours when left standing, a valve to aerate the water should be fitted before this filter.

Installation Guide

IRON & MANGANESE UNIT WITH ERIE VALVE - CHARGING & FITTING INSTRUCTIONS

CHARGING

  1. Unscrew control head from cylinder and remove gently
  2. Place riser tube back into cylinder ensuring it is central
  3. The media charges are numbered. Pour first bag of media (labelled ‘1’) into the cylinder ensuring none enters the riser tube and that the riser tube remains central. Use of a funnel is recommended
  4. Shake the cylinder gently to level the media
  5. Repeat steps 3 & 4 for each bag of media in numerical order
  6. Push top screen onto riser tube and replace the control head screwing up firmly
  7. If you have a potassium permanganate tank this should be ready charged (we recommend the level is checked on at least a yearly basis)

FITTING

  1. Connect the inlet of the iron unit to the water supply,
    DO NOT connect outlet
  2. If your unit has a potassium permanganate backwash tank:
  • ·         Locate the ‘black tee’ on left side of unit head
  • ·         Partly unscrew black nut
  • ·         Push the black 3/8” tube from the tank, through the black nut and into the black tee
  • ·         Tighten nut to secure – do not over-tighten as this could split.
  1. Fit drain line to the drain elbow on top of head
  2. Allow water to flush through the unit slowly until water runs clear
  3. Connect outlet to water line
  4. Connect transformer to power supply.
  5. The system is now in service

INSTRUCTIONS FOR ATTACHING POTASSIUM PERMANGANATE TANK

  • Partly unscrew black nut at back of valve head on Iron & Manganese Unit
  • Push tube from potassium permanganate tank through nut in black elbow
  • Tighten nut to secure.  Do not over-tighten as this could split nut
  • Fit overflow pipe to elbow on side of tank and run to drain

NB: If a PH correction unit is required this must be fitted on the water line BEFORE the iron & manganese unit.

Silverline UK

Based in Devon, with distributors throughout Europe, Silverline UK Limited manufactures a wide range of water treatment systems and products.

Reasons to choose Silverline Uk

  • The highest quality materials are always used.
  • We have a technical team available to interpret your water report and give advice on suitable solutions.
  • We can advise and manufacture to your specific requirements.
  • We have a wide range of products to meet your individual needs, domestic and commercial.
  • Prompt postage or delivery with a range of carriage options.
  • Reminder service to let you know when your filter/cartridge needs replacing.
  • Wide range of WRAS approved products.
  • All components and parts conform to British standards BS6920
  • The filtration media are approved by the Drinking Water Inspectorate and the Department of the Environment
  • Careful testing is performed on all our products and reports are available for many to substantiate performance.
  • Friendly well informed staff happy to assist.