Turbidity units - Well and borehole water systems from Silverline UK

Turbidity filters are for use with potable water to reduce turbidity  and produce clearer water.

It consists of a tall cylinder to allow good contact time, filled with an assortment of filtration media, fitted with an automatic backwash head so the unit can clean itself.

As water passes through the filter it collects dirt and sediment allowing the clean water back into the water system.  At set intervals, normally in the early hours of the morning when there is little or no water usage, the unit cleans itself to free the dirt within and flush it down the drain.  This leaves the filter clean and ready to begin collecting contaminants again the following day. 

Description           ABS lined cylinder 56" x 10"
                          3 cycle backwash valve
                          Drain hose 1.5 metres

Restricting           Pressure 20 to 125 psi
parameters          Cold water applications only
                          Must not be allowed to freeze.

Maintenance         Back washing to clean the media and remove 
                          contaminants is fully automatic.  At intervals a
                          full media change may be necessary.